Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Install instructions for the TRIM around water/ice dispenser in GE Refrigerator
Options
Go to last post Go to first unread
Model: TFX22PRBB WW Brand: GE Age: 5 - 10 years
Previous Topic Next Topic
pkorisa  
#1 Posted : Tuesday, April 13, 2010 11:51:03 AM(UTC)
pkorisa

Rank: Member

Groups: Registered
Joined: 3/27/2009(UTC)
Posts: 5
I just ordered the TRIM from AppliancePartsPros for my GE Refrigerator, Model TFX22PRBB WW. The Trim Part number and description is AP2069774 (WR38X10109) - Trim.

I was told that I can get the Installation instruction help by coming here.

Please let me know what is the correct way (how to) to install this TRIM when I get it in a few days.

Thank you.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Tuesday, April 13, 2010 4:04:50 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
It's pretty simple and you'll see it as soon as you will receive the part. It has tabs around as shown on the following picture:

UserPostedImage

Gene.
Back to top
pkorisa  
#3 Posted : Tuesday, April 13, 2010 4:49:47 PM(UTC)
pkorisa

Rank: Member

Groups: Registered
Joined: 3/27/2009(UTC)
Posts: 5
Yes, i did saw the clips. But how does it go in -- do I start at the bottom and slide up towards the top, and then push hard all around for the clips to click or what. Or, do I just overlay on top of the mounting underneath and then push hard for it to snap in place? Thanks again.
Back to top
Gene  
#4 Posted : Tuesday, April 13, 2010 4:53:07 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
I do not see any difference. Looks pretty same to me.

Gene.
Back to top
pkorisa  
#5 Posted : Tuesday, April 13, 2010 6:11:42 PM(UTC)
pkorisa

Rank: Member

Groups: Registered
Joined: 3/27/2009(UTC)
Posts: 5
Originally Posted by: Gene Go to Quoted Post
I do not see any difference. Looks pretty same to me.

Gene.

don't understand your last comment. The tabs are all different - top has three longer ones, bottom has 4 short ones, and the two sides have three but they are much longer.
And, if you overlay this trim on top of the mount, it will not just go in. You will have to hard-press for them to snap into the mounting frame, or, you will have to slide it in and then press to snap the tabs.
There has to be a correct process to remove this trim and to put it back on.
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET