2 Pages12> Go to Page...

Washer agitates instead of spinning during the spin cycle. Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

vinny227		#1 Posted : Saturday, April 3, 2010 5:16:48 PM(UTC)
Rank: Member Groups: Registered Joined: 4/3/2010(UTC) Posts: 6		I have a Whirlpool washer that was working fine until a couple if days ago. All of a sudden, during the spin cycle, the washer will continue to agitate instead of spinning. The water still drains out, but the clothes are still soaked because of the spin cycle not working correct. Any ideas how to fix it or what could be wrong?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

ApplianceJunk		#2 Posted : Sunday, April 4, 2010 4:04:48 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 7/24/2007(UTC) Posts: 2,277		Hi, What is the model number of the washer?
User Profile View All Posts by User View Thanks

vinny227		#3 Posted : Sunday, April 4, 2010 11:28:20 AM(UTC)
Rank: Member Groups: Registered Joined: 4/3/2010(UTC) Posts: 6		Whilpool LXR7244JQ1
User Profile View All Posts by User View Thanks

richappy		#4 Posted : Monday, April 5, 2010 3:19:25 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Seems like a busted tranny AP3096209 Confirm by pulling the pump and motor and turning the tranny coupler clockwise. If it agitates, that confirms it. Rather rare though.
User Profile View All Posts by User View Thanks

vinny227		#5 Posted : Monday, April 5, 2010 3:20:33 PM(UTC)
Rank: Member Groups: Registered Joined: 4/3/2010(UTC) Posts: 6		I removed the pump and motor, and turned the shaft clockwise. The barrel spins relatively fast, and the agitator moves slowly back and forth. That is just turning it by hand. While in the spin cycle, the barrel would not spin at all.
User Profile View All Posts by User View Thanks

richappy		#6 Posted : Tuesday, April 6, 2010 12:57:05 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		**********
User Profile View All Posts by User View Thanks

richappy		#7 Posted : Tuesday, April 6, 2010 1:03:51 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		You have a bad clutch. You will need to pull the tranny to replace it.Order AP3094537 Have someone hold the agitator while turning the tranny coupler clockwise. Agitator should be easy to hold still, if not, you have a bad tranny although rather rare.
User Profile View All Posts by User View Thanks

vinny227		#8 Posted : Tuesday, April 6, 2010 1:02:53 PM(UTC)
Rank: Member Groups: Registered Joined: 4/3/2010(UTC) Posts: 6		I can turn the tranny coupler several times and be able to hold the agitator. After about five spins or so the agitator wants to start moving. Still think its the clutch?
User Profile View All Posts by User View Thanks

richappy		#9 Posted : Tuesday, April 6, 2010 1:13:20 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Yes, you definitely have a bad clutch. You can confirm by pulling the tranny,then try to turn the clutch band inside the clutch housing, if easy to turn, put a new clutch in. After the new clutch is in, see if that solves all your other prioblems.
User Profile View All Posts by User View Thanks

vinny227		#10 Posted : Wednesday, April 7, 2010 1:29:29 AM(UTC)
Rank: Member Groups: Registered Joined: 4/3/2010(UTC) Posts: 6		Thanks a lot. I have a new one arriving today. I should have it in this afternoon, I hope thats all that was wrong. I appriciate the help.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)

2 Pages12> Go to Page...