Rank: Member
Groups: Registered
Joined: 10/13/2009(UTC)
Posts: 11
|
Hi Hill, you are probably right. most of the carrier unit I've work on with the symtom he describe are the 10 ton unit. Thats why i need to know the model #,
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/4/2009(UTC)
Posts: 58
|
Finally we replaced the evaporator section and all is well now suction pressure 69psig with high side @260psig. This unit cools a shopping mall top floor. We suspect the coil was too blocked up even after cleaning. apparently after not being serviced for over 2-3 yrs all that mock etc., could not be cleaned out . Thanks to u all for your advice, we will let u all know how it goes. jeffrey_benjamin. :) ;)
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/28/2009(UTC)
Posts: 29
|
Originally Posted by: jeffrey_benjamin  Finally we replaced the evaporator section and all is well now suction pressure 69psig with high side @260psig. This unit cools a shopping mall top floor. We suspect the coil was too blocked up even after cleaning. apparently after not being serviced for over 2-3 yrs all that mock etc., could not be cleaned out . Thanks to u all for your advice, we will let u all know how it goes. jeffrey_benjamin. :) ;) thanks now i can believe it is a 30 ton if your cooling a entire floor af shopping center
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
