Neptune not going into high speed spin - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Neptune not going into high speed spin Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MAH4000AWW	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

silvercbx		#1 Posted : Sunday, February 21, 2010 2:36:20 PM(UTC)
Rank: Member Groups: Registered Joined: 2/21/2010(UTC) Posts: 6		Our 10 yr Neptune has just started to fail to go into the high speed spin after the 3rd rinse, so clothes are all wet. When I listened closely, the motor seemed to never go into the high speed mode; the pump drained but the spin did not occur so clothes still wet. Proficient at tech stuff but don't know exactly where to start or what to look for. Wiring diagrams? Repair manual? :confused:


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

magician59		#2 Posted : Monday, February 22, 2010 7:42:43 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		Sounds like the motor (and motor drive board). Unfortunately, they're sold as an assembly (or kit). Here's the part number: Part number: AP4010145


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close