Rank: Member
Groups: Registered
Joined: 2/19/2010(UTC) Posts: 3
|
I just replaced the main electrical board a week ago and it worked just fine. It stoped woring yesterday, when I push the buttons the lights come on but nothing happens. The cancel button will still turn on the pump. The board itself felt worm when the washer was off. I turned off the main power for one hour,turned it back on it started. one hour later same thing all over agian. Can any one help! Thanks!
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/16/2007(UTC) Posts: 3,273
|
Sure sounds like you got a bad board.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/19/2010(UTC) Posts: 3
|
Originally Posted by: magician59  Sure sounds like you got a bad board. Thanks for the information. Will get a new board and give it a whirl.:)
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/19/2010(UTC) Posts: 3
|
Got the second board, installed it and ran the dishwasher. However, when the dishwasher was not running the panel felt hot and I cut the power off to the dishwasher. Must be something other than a bad board. Any other suggestions.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close