Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
brandinm  
#1 Posted : Saturday, February 10, 2024 5:09:13 PM(UTC)
brandinm

Rank: Member

Groups: Registered
Joined: 2/10/2024(UTC)
Posts: 0
United States
Location: South Carolina

Dryer will power on but not start. Depending on the dryer setting it will click 1-3 times, it did this before I changed the thermistor but stopped and it started doing it again after I got the new control board.


I have fixed what I know wasn’t working but I’m at a standstill.

Error code TE1 I changed the thermistor and it was bad it was checked with a meter

Fuse was reading 0.1 and I believe that is okay

Control board would not read so ordered a new one the new one picks up on the meter so I know it works.

Belt is on nicely like it should be.

Should I keep trying to fix it or just get a new one?

Single mom don’t really have the money to replace it or pay someone to fix it so trying to diy it.

Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Jason O  
#2 Posted : Tuesday, February 27, 2024 7:28:00 AM(UTC)
Jason O

Rank: Member

Groups: Moderators, APP Team, Registered
Joined: 4/11/2019(UTC)
Posts: 0
United States

Was thanked: 1 time(s) in 1 post(s)
Hello, since you have already changed the main control there are just a couple of things that would stop it from running. The door switch, belt switch, and motor itself but with the clicks you are hearing I would suspect an issue with the PCB assembly.[AP6799342]. Unfortunately, this part has been discontinued so the repair cannot be done.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.