Dishwasher Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: FDB1050REB0	Brand: Frigidaire	Age: 1 - 5 years
Previous Topic Next Topic

tko4081		#1 Posted : Saturday, February 6, 2010 11:02:46 AM(UTC)
Rank: Member Groups: Registered Joined: 1/23/2010(UTC) Posts: 8		I change the heat element.It does not dry dishes like it use to it as 120 deg. hot water. clean dishes ok:cool:
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

denman		#2 Posted : Saturday, February 6, 2010 11:49:36 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for FRIGIDAIRE FDB1050REB0 Frigidaire/dishwasher | AppliancePartsPros.com Here is the tech sheet http://manuals.frigidaire.com/prodinfo_pdf/Kinston/154547901.pdf When you replaced the heater did you check it or did you just replace it because you felt it was the most likely cause? Is the vent opening?
		THIS FORUM IS DEAD!!!!!!!
User Profile View All Posts by User View Thanks

tko4081		#3 Posted : Saturday, February 6, 2010 12:48:17 PM(UTC)
Rank: Member Groups: Registered Joined: 1/23/2010(UTC) Posts: 8		Originally Posted by: denman Here are your parts Replacement parts for FRIGIDAIRE FDB1050REB0 Frigidaire/dishwasher | AppliancePartsPros.com Here is the tech sheet http://manuals.frigidaire.com/p...df/Kinston/154547901.pdf When you replaced the heater did you check it or did you just replace it because you felt it was the most likely cause? Is the vent opening? can not answer that would be next thing to check the vent move up and down
User Profile View All Posts by User View Thanks

denman		#4 Posted : Saturday, February 6, 2010 12:59:05 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Yes, perhaps it is not letting the steam out
		THIS FORUM IS DEAD!!!!!!!
User Profile View All Posts by User View Thanks

tko4081		#5 Posted : Saturday, February 6, 2010 1:06:50 PM(UTC)
Rank: Member Groups: Registered Joined: 1/23/2010(UTC) Posts: 8		:) Originally Posted by: tko4081 can not answer that would be next thing to check the vent move up and down may be the switch is bad
User Profile View All Posts by User View Thanks

tko4081		#6 Posted : Saturday, February 6, 2010 1:26:18 PM(UTC)
Rank: Member Groups: Registered Joined: 1/23/2010(UTC) Posts: 8		Originally Posted by: tko4081 :) may be the switch is bad The dry mode is on know and it still as soap sud
User Profile View All Posts by User View Thanks

denman		#7 Posted : Saturday, February 6, 2010 1:44:05 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Sorry but I do not understand
		THIS FORUM IS DEAD!!!!!!!
User Profile View All Posts by User View Thanks

tko4081		#8 Posted : Sunday, February 7, 2010 5:54:14 AM(UTC)
Rank: Member Groups: Registered Joined: 1/23/2010(UTC) Posts: 8		Originally Posted by: denman Sorry but I do not understand The bake element never gets hot or steam from front of door i open the door right before dry cycle element was not hot
User Profile View All Posts by User View Thanks

denman		#9 Posted : Sunday, February 7, 2010 8:15:31 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Open it during the dry cycle and see if it is hot. If not then Remove check that the hi-limit thermostat is OK, should be 0 ohms. Check that the heater is OK, should be around 20 ohms. If both are OK then probably the control board is shot or you have a bad connection between the board and the heater/hi-limit.
		THIS FORUM IS DEAD!!!!!!!
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)

Similar Topics

Frigidaire dishwasher code A (Dishwasher Repair) by Evandtam 6/27/2024 5:11:41 PM(UTC)

Fisher Paykel Drawer Dishwasher will not Lock (Dishwasher Repair) by thompsdw 6/17/2024 7:34:54 AM(UTC)

Dishwasher won't work. (Dishwasher Repair) by Guest 5/23/2024 6:32:18 PM(UTC)

High-pitched noise with LG dishwasher (Dishwasher Repair) by Guest 5/17/2024 5:13:53 AM(UTC)

Cafe Dishwasher little to no heat, not cleaning dishes well. (Dishwasher Repair) by Jtaylor20 5/16/2024 10:15:38 AM(UTC)

Bosch Dishwasher dirty water in filter " hole" (Dishwasher Repair) by Guest 5/14/2024 9:47:25 AM(UTC)

Bosch dishwasher SHVM78Z53N/01 (Dishwasher Repair) by Guest 5/8/2024 8:58:29 PM(UTC)

Continuity TEst Samsung p/n 33299012 Dishwasher Water Inlet Valve. (Dishwasher Repair) by cprodave 4/27/2024 6:55:56 PM(UTC)

Samsung DMT400RHS Dishwasher Over Level Water Error. (Dishwasher Repair) by cprodave 4/27/2024 6:24:56 PM(UTC)

Samsung Dishwasher Water Inlet Valve--how to Test? (Dishwasher Repair) by cprodave 4/27/2024 6:18:51 PM(UTC)

Kitchen aid dishwasher bottom leaking (Dishwasher Repair) by Guest 4/21/2024 10:31:25 AM(UTC)

Bosch Dishwasher SHE3ARF6UC/22 E15 Error (Dishwasher Repair) by codyace 3/29/2024 11:51:41 AM(UTC)

GE dishwasher GDT695SSJ0SS middle arm not spinning (Dishwasher Repair) by merrittjr 3/23/2024 10:51:00 AM(UTC)

Bosch Dishwasher Display Goes Out After Latching Door (Dishwasher Repair) by Guest 3/11/2024 7:00:18 PM(UTC)

Kenmore 90 665 dishwasher noise from impellor (Dishwasher Repair) by Guest 3/10/2024 12:30:08 PM(UTC)