Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
CAN i DO THIS
Options
Go to last post Go to first unread
Model: MGR5710ADW Brand: Maytag Age: 5 - 10 years
Previous Topic Next Topic
dawgtired  
#1 Posted : Monday, March 24, 2008 3:18:40 PM(UTC)
dawgtired

Rank: Member

Groups: Registered
Joined: 3/24/2008(UTC)
Posts: 3
My wife lifted the non-removable top of our maytag.
The gas pipes leading to the 2 front burners snapped.
I have fixed just about every other appliance and gas and/electrical thing we own from the hvac to the outdoor grill to the jacussi.
I have identified the part(s) I need as the Fitting assy., Orifice (lt) Part Number: AP375397.
I think I can do this. Can I do this?
Any advise? There is less available on line than other diy repairs I have made.
Thx
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Tuesday, March 25, 2008 10:55:38 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
This part is not too difficult to replace yourself and I believe you can do it.

The part number you mentioned is for conversion to LP. You have to order the fitting assembly with the part number AP375375. Looks like you'll need two of them.

Here are the break down diagrams for the Maytag range Model MGR5710ADW

Gene.
Back to top
dawgtired  
#3 Posted : Tuesday, March 25, 2008 12:20:43 PM(UTC)
dawgtired

Rank: Member

Groups: Registered
Joined: 3/24/2008(UTC)
Posts: 3
Thanks Gene.
I have noodled out the r and r. It looks stright forward. Thanks for the heads up on the part correction. Yes I need 2. There is no "right hand" I presume. I will order them as soon as you confirm the same part fits both sides.
cheers!:D
Back to top
Gene  
#4 Posted : Tuesday, March 25, 2008 1:12:50 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
There is no "right hand" fitting assembly in the parts list.

If the burner knobs on the control panel are (from left to right) left front, left rear, right front and right rear - then both parts are identical.

Gene.
Back to top
dawgtired  
#5 Posted : Tuesday, March 25, 2008 3:12:17 PM(UTC)
dawgtired

Rank: Member

Groups: Registered
Joined: 3/24/2008(UTC)
Posts: 3
Dang it! In fact It is set up L-front, L-rear, R-rear R-front respectively.
I will need to call and check into the availability of a "right side".
Thanks again for the heads up.
I'd like to order from this sight given the prices and help I rcvd.
Back to top
Gene  
#6 Posted : Tuesday, March 25, 2008 3:17:35 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Call the APP customer service (877-477-7278) and ask for Adam.

Gene.
Back to top
Users browsing this topic
Guest (5)
Similar Topics
Can I do this (Washer Repair)
by grego4u 8/16/2010 12:18:24 PM(UTC)
can I do this myself (Washer Repair)
by ca6tz 7/1/2008 7:52:03 AM(UTC)
Can I Do This Repair Myself?? (Dishwasher Repair)
by pmaxp 8/18/2007 6:01:47 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET