Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Igniter installation for Tappan Oven
Options
Go to last post Go to first unread
Model: 30806637E7063 Brand: Tappan Age: More than 10 years
Previous Topic Next Topic
almah1  
#1 Posted : Sunday, March 23, 2008 4:35:11 PM(UTC)
almah1

Rank: Member

Groups: Registered
Joined: 3/15/2008(UTC)
Posts: 4
I have received the ignitor from this site and have a few question on installation

I have removed the oven floor and baffle I can see the burner and ignitor but the wires go down through into the back floor of the oven. can i splice the ignitor here or should i try to locate the other end near the valve

Also does it matter which wire on the new ignitor goes which wire on the old connector that i will splice in
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Monday, March 24, 2008 11:51:01 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You can definitely splice the igniter from inside of the oven and it does not matter which wire where goes.

Gene.
Back to top
almah1  
#3 Posted : Tuesday, March 25, 2008 7:27:48 PM(UTC)
almah1

Rank: Member

Groups: Registered
Joined: 3/15/2008(UTC)
Posts: 4
Gene thanks for the quick reply oven is working like new The two screws that attach igniter to burner were frozen on I had to drill out the screws and use new screws there must be a easier way to remove old screws whats your secret?

Also the stove top center burner (grill) does not light I hear no clicking sound i have to use a starter stick to light it all other burners work fine the right front burner s a little slow to start maybe take 15-20 clicks before it starts with a big poof
Back to top
Gene  
#4 Posted : Wednesday, March 26, 2008 6:33:02 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
I'm glad you were able to fix the oven.

Most likely the problem with the grill is a bad ignition switch and the right front burner probably needs cleaning. For more accurate advise I need the right model number of the range. The model number you posted is incorrect.

Gene.
Back to top
almah1  
#5 Posted : Wednesday, March 26, 2008 9:26:19 PM(UTC)
almah1

Rank: Member

Groups: Registered
Joined: 3/15/2008(UTC)
Posts: 4
Back to top
Gene  
#6 Posted : Saturday, March 29, 2008 10:25:44 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The part number for the ignition switch is AP2124410

Looking at the burner you can see a few holes around the top part of the burner and a few vertical holes from the ignition side. It is very important to have all these holes open. You can use any sharp pin (like a toothpick) to unblock them.

Gene.
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Igniter installation for Tappan Oven (Oven Repair (including Ranges and Cooktops))
by robbi6250 12/27/2007 11:11:04 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET