GE tub seal replacement - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

GE tub seal replacement Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GHDSR316H0WW	Brand: GE	Age: 1 - 5 years
Previous Topic Next Topic

lacerdm		#1 Posted : Thursday, January 21, 2010 6:55:48 PM(UTC)
Rank: Member Groups: Registered Joined: 1/21/2010(UTC) Posts: 1		My 2yr old GE has sprung a leak... it trickles down the shaft from the tub ont the mode-shifter/transmission...I did some searching and managed to remove inner tub and the "split ring" so I am staring at the rubber seal that needs to be replaced...Unsure of next step...which might be obvious once I have the new part in hand...but do I just grab the rubber with pliers and pull it up/out... doe the new part just slide down shaft and is seated in the hole...what holds it in place? I have a washer that looks exactly like this: Tub, basket & agitator replacement parts for General Electric GHDSR316H0WW Washer \| AppliancePartsPros.com


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Migeguy		#2 Posted : Thursday, January 21, 2010 9:15:37 PM(UTC)
Rank: Member Groups: Registered Joined: 1/17/2010(UTC) Posts: 15		Originally Posted by: lacerdm My 2yr old GE has sprung a leak... it trickles down the shaft from the tub ont the mode-shifter/transmission...I did some searching and managed to remove inner tub and the "split ring" so I am staring at the rubber seal that needs to be replaced...Unsure of next step...which might be obvious once I have the new part in hand...but do I just grab the rubber with pliers and pull it up/out... doe the new part just slide down shaft and is seated in the hole...what holds it in place? I have a washer that looks exactly like this: Tub, basket & agitator replacement parts for General Electric GHDSR316H0WW Washer \| AppliancePartsPros.com You will see 3 tabs on the seal case.Pull up on 1 of the tabs and the seal should come out.Do not try to pry seal out because you might crack the outer tub flange. new seal goes back on the shaft but be careful that you don't cut the seal going over the treads of the shaft. Hopefully the water has not damaged the lower bearing in the spin-tube. You will know by the sound of a roaring sound during spin cycle.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close