Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Kenmore Ultra Wash not draining
Options
Go to last post Go to first unread
Model: 665 15755790 Brand: Kenmore Age: More than 10 years
Previous Topic Next Topic
Stina  
#1 Posted : Monday, January 18, 2010 3:07:48 PM(UTC)
Stina

Rank: Member

Groups: Registered
Joined: 1/18/2010(UTC)
Posts: 1
Came home to a flooded kitchen. After removing all visible debris, we ran the dishwasher. There is standing water that will not drain. We are attempting to clear it but we are running into problems.
We have removed the rotating arm, and then the cap with 8 screws. We can see what appears to be a screen, and we assume the hose/drain is underneath, but we can't remove the next layer. There is a black rotating disc with a small nut that we can't seem to reach. Suggestions?
http://img686.**********...us/img686/6602/009bz.jpg

Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Tuesday, January 19, 2010 12:59:59 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I could not finds any tech info on this unit.

Perhaps this will help
https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/56e33eb0e839a7fa85256a8e00510938/$FILE/4322430.pdf

Here is a parts breakdown for a unit which uses the same type of pump.
It should be close to yours
Replacement parts for WHIRLPOOL DU910PFGB0 | AppliancePartsPros.com

Sounds like you may have more than one problem.
If the unit overfilled then the float/overfill switch did not work.
It should have killed power to the fill valve once an overfill happened, preventing a flood.
Or
Could be the fill valve is not closing correctly.

Hopefully someone will jump in with more info on pump dis-assembly.
THIS FORUM IS DEAD!!!!!!!
Back to top
namnyef  
#3 Posted : Saturday, October 16, 2010 9:58:49 AM(UTC)
namnyef

Rank: Member

Groups: Registered
Joined: 10/15/2010(UTC)
Posts: 1
Stina,

Were you able to remove the black rotating disk and screw? I've tried but it's stuck. Tried WD-40 to no avail.

Thanks

Namnyef
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Kenmore Ultra Wash Not Draining (Dishwasher Repair)
by jsnider608 11/29/2011 6:54:26 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET