Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Snowboarder81  
#1 Posted : Wednesday, December 16, 2009 12:57:46 AM(UTC)
Snowboarder81

Rank: Member

Groups: Registered
Joined: 12/16/2009(UTC)
Posts: 2

OK so I disassembled my dryer to replace the heating element and that went fine, problem is when I went to reassemble I realized I have no Idea what wires to attach were on the timer. I have A, B, C, F, T, & X connectors and Orange(12), Red(12), Brown(14), and Yellow(14) wires.

Any help would be greatly appreciated!

Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Snowboarder81  
#2 Posted : Friday, December 18, 2009 10:43:08 AM(UTC)
Snowboarder81

Rank: Member

Groups: Registered
Joined: 12/16/2009(UTC)
Posts: 2

Ok through trial and error I have found the correct wiring combination. From top left to right it goes... Brown, Red, Orange. With bottom left yellow. I hope this helps someone else out cause finding that out was a nightmare.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.