making sure i order right part freezer ok/ fridge warm - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

making sure i order right part freezer ok/ fridge warm Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: ED5VHEXTQO1	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

hd4ou		#1 Posted : Monday, November 30, 2009 9:27:51 AM(UTC)
Rank: Member Groups: Registered Joined: 11/29/2009(UTC) Posts: 8		typical refridge warm, freezer ok deal. Got continuity on defrost thermostat thats mounted on the evap coil in freezer compartment when frozen. heater element has 23.2 ohms resistence. Only leaves defrost timer right? Its the control board type and not the mechanical one. Dont see a slot to manually put into defrost mode. Is there something I can do to put into defrost mode? I have allready defrosted the evap coil manually and it will be fine for a couple of weeks. So I know that compressor, and everything else seems to be fine. any suggestions or do I just need the defrost timer control board? I think that part number is ap3109394. It looks identical to mine. Just asking these questions cause I hate to spend $80 buck on something I dont need. By the way, I looked at my defrost timer and nothing seems burnt or out of place.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Monday, November 30, 2009 12:18:38 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		If the defrost heater and defrost thermostat both checked OK, then there is nothing left but the defrost control. You also can perform the troubleshooting as described in the Tech sheet before replacing any parts. - The defrost control Part number: AP3109394 Here are the breakdown diagrams and Replacement parts for WHIRLPOOL ED5VHEXTQ01 Refrigerator \| AppliancePartsPros.com Gene.


User Profile View All Posts by User View Thanks

hd4ou		#3 Posted : Monday, November 30, 2009 8:01:37 PM(UTC)
Rank: Member Groups: Registered Joined: 11/29/2009(UTC) Posts: 8		Okay, Done both option 1 and 2 on the tech sheet and still no defrost. So is that classic for a bad defrost control board?


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Monday, November 30, 2009 8:30:51 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Unfortunately nothing last forever, especially electronic parts. Gene.


User Profile View All Posts by User View Thanks

hd4ou		#5 Posted : Tuesday, December 1, 2009 5:13:42 AM(UTC)
Rank: Member Groups: Registered Joined: 11/29/2009(UTC) Posts: 8		ok Gene thanks I will get one and see if it works.


User Profile View All Posts by User View Thanks

Gene		#6 Posted : Tuesday, December 1, 2009 12:31:15 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome. Keep us posted. Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close