Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Washer don't spin
Options
Go to last post Go to first unread
Model: 11047512601 Brand: Kenmore Age: 1 - 5 years
Previous Topic Next Topic
cdodge  
#1 Posted : Wednesday, October 14, 2009 8:55:05 AM(UTC)
cdodge

Rank: Member

Groups: Registered
Joined: 10/14/2009(UTC)
Posts: 3
My washer does'nt spin.It washes,drains but does'nt spin.The only time it spins is when it is empty.I replaced the electronic board on top.I got it to spin twice with 2 towles in it in about 10 tries. Ser# is HLT4353286.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
sidfink43  
#2 Posted : Thursday, October 15, 2009 3:59:20 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
See if you can find the tech notes with trouble shooting routines, either under the top or inside the bottom panel.

A probable cause is your motor control board, but it is very expensive and you do not want to replace it unless you are sure that is the problem.
Back to top
cdodge  
#3 Posted : Friday, October 16, 2009 5:46:24 AM(UTC)
cdodge

Rank: Member

Groups: Registered
Joined: 10/14/2009(UTC)
Posts: 3
Originally Posted by: cdodge Go to Quoted Post
My washer does'nt spin.It washes,drains but does'nt spin.The only time it spins is when it is empty.I replaced the electronic board on top.I got it to spin twice with 2 towles in it in about 10 tries. Ser# is HLT4353286.

I got the tech notes and ran A diagnostic test and everything worked it would even spin at high speed. I cant get A erroe code. Plus now I can't make it run the clean washer cycle without A F34 code with nothing in it.
Back to top
sidfink43  
#4 Posted : Friday, October 16, 2009 8:27:34 AM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
Well, based on this information I would suspect the main board, but you have already replaced it.

It is possible, maybe even likely the main board you received was defective, and I would see if you can get an exchange on it. That way you will either have it fixed or know for sure the main board is not the problem.
Back to top
cdodge  
#5 Posted : Tuesday, October 27, 2009 7:38:36 AM(UTC)
cdodge

Rank: Member

Groups: Registered
Joined: 10/14/2009(UTC)
Posts: 3
I replaced the ccu board and the touch pad board. What next? There is no change.
Back to top
sidfink43  
#6 Posted : Tuesday, October 27, 2009 12:39:41 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
See if there is anything in the tech notes about testing the motor control unit.
Back to top
Users browsing this topic
Guest (3)
Similar Topics
washer don't spin (Washer Repair)
by jbrunetquixtar 7/4/2009 5:40:58 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET