Dryer roar Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: GGW9200LQ0	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

ctsmd		#1 Posted : Wednesday, September 9, 2009 8:00:26 AM(UTC)
Rank: Member Groups: Registered Joined: 9/9/2009(UTC) Posts: 4		My dryer over last 6 months has gotten louder while running kinda like a roar. Not sure if rollers may be worn or bearing going out. Any thoughts would be greatly appreciated. Thanks Carl
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Frank / APP Team		#2 Posted : Wednesday, September 9, 2009 11:03:10 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 8/5/2009(UTC) Posts: 393		Originally Posted by: ctsmd My dryer over last 6 months has gotten louder while running kinda like a roar. Not sure if rollers may be worn or bearing going out. Any thoughts would be greatly appreciated. Thanks Carl Could be a rollers, depending on the noise. I'd be more apt to look at the blower if the noise is fast noise, if that makes sense. They can get pretty noisy when they get loose on the motor shaft, or something could be contacting it. Part number: AP2912089
User Profile View All Posts by User View Thanks

ctsmd		#3 Posted : Saturday, September 12, 2009 6:56:56 AM(UTC)
Rank: Member Groups: Registered Joined: 9/9/2009(UTC) Posts: 4		Frank, How do I remove top panel to get access to remove front panel? Thanks Carl
User Profile View All Posts by User View Thanks

Frank / APP Team		#4 Posted : Monday, September 14, 2009 4:37:30 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 8/5/2009(UTC) Posts: 393		Originally Posted by: ctsmd Frank, How do I remove top panel to get access to remove front panel? Thanks Carl Looks like a couple of screws on the back. Then the top will lift off. You may have to remove the control panel also, to get the front bulkhead off, which will help you see everything better. I believe the link below with the parts breakdown will help you out. Model GGW9200LQ0
User Profile View All Posts by User View Thanks

denman		#5 Posted : Monday, September 14, 2009 4:56:44 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		This may also help https://secured.whirlpoo...64beaa/$FILE/Duetdry.pdf
		THIS FORUM IS DEAD!!!!!!!
User Profile View All Posts by User View Thanks

ctsmd		#6 Posted : Thursday, September 17, 2009 7:21:44 AM(UTC)
Rank: Member Groups: Registered Joined: 9/9/2009(UTC) Posts: 4		Frank or denman, Once apart it seemed to be the rollers. Blower not loose and one roller had flat spot. 4 new rollers arriving today and new belt. Do I need to put any kind of lubricate on the roller shafts? Thanks Carl
User Profile View All Posts by User View Thanks

denman		#7 Posted : Thursday, September 17, 2009 8:50:25 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Do I need to put any kind of lubricate on the roller shafts? No but I would clean the shafts and check that they are not worn.
		THIS FORUM IS DEAD!!!!!!!
User Profile View All Posts by User View Thanks

ctsmd		#8 Posted : Friday, September 18, 2009 4:45:10 AM(UTC)
Rank: Member Groups: Registered Joined: 9/9/2009(UTC) Posts: 4		All went well with replacing rollers. Dryer now quiet. Thanks For the help. Carl
User Profile View All Posts by User View Thanks

churchs		#9 Posted : Friday, October 9, 2009 11:17:02 AM(UTC)
Rank: Member Groups: Registered Joined: 10/9/2009(UTC) Posts: 1		Like Carl, I have a roaring dryer as well. My dryer is a Maytag washer from 1994 (I think). Model number LDE8904ACE. It seems to start with a loud roar and what sounds like a bump or jolt. The roar subsides somewhat as it goes but is still much louder than before. On occasion, it sounds like it slows way down then speeds back up (at least according to my wife as I have not heard that happen). I attribute that to larger loads causing the tumbler belt to slip. Because I am thinking the tumbler is the problem, I should have to replace the bearing kits front and rear and the tumbler belt. There is a pulley on the moter that might have to be replaced as well. Is there anything else that you might recommend that might fix this problem or that I might have over looked? - Stan
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (5)

Similar Topics

GE Dryer Roar Noise (Dryer Repair) by germgerm222 1/26/2010 4:57:16 PM(UTC)