Electric dryer wont tumble - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Electric dryer wont tumble Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 110.66712694	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

chancock		#1 Posted : Monday, September 21, 2009 9:52:23 AM(UTC)
Rank: Member Groups: Registered Joined: 9/19/2009(UTC) Posts: 2		dryer will heat but wont tumble. when I set the timer and hit start I can hear the timer working and feel the heat but the drum wont turn


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Wednesday, September 23, 2009 7:16:55 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Sounds like a broken belt. Open the lint screen lid and take out the two phillips head screws you see. Then insert a screw driver or putty knife in the gap between the top and the front and release the top, which will flip up. You can now see the belt, or in your case, where the belt is supposed to be. To replace it, take off the front, and remove the old belt which should be on the floor and put on the new one.


User Profile View All Posts by User View Thanks

chancock		#3 Posted : Saturday, September 26, 2009 12:46:02 PM(UTC)
Rank: Member Groups: Registered Joined: 9/19/2009(UTC) Posts: 2		Originally Posted by: sidfink43 Sounds like a broken belt. Open the lint screen lid and take out the two phillips head screws you see. Then insert a screw driver or putty knife in the gap between the top and the front and release the top, which will flip up. You can now see the belt, or in your case, where the belt is supposed to be. To replace it, take off the front, and remove the old belt which should be on the floor and put on the new one. It was not the belt could it be the thermal fuse?


User Profile View All Posts by User View Thanks

sidfink43		#4 Posted : Saturday, September 26, 2009 1:25:39 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		If the dryer will heat but not tumble then either the belt is broken or off the pulley(which you say it is not) or the drum is hung up in some way or the motor is not turning. See if you can easly turn the drum, if you can then the likely problem is a bad motor. See if it is turning or trying to turn.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close