Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
MVMOORE70  
#1 Posted : Friday, September 25, 2009 4:54:57 AM(UTC)
MVMOORE70

Rank: Member

Groups: Registered
Joined: 9/23/2009(UTC)
Posts: 4

My GE upright has ice and frost buildup at the bottom-back of the freezer where it used to blow cold air. Doesn't feel like any air is blowing. I unplugged it to allow it to completely defrost and have the same problem. I did the dollar test and it didn't come out easily at all, suction seems to still be pretty good. It seems to be a motor going, but I'm not sure what it is. The food has almost completely thawed and I don't know what to do. I hope this is something that I can repair myself, as I am very handy. If not, I'm wondering if I should just buy a new one. Thanks guys.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Friday, September 25, 2009 6:06:27 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
If the unit has auto defrost then that may be your original problem.

Remove the evaporator coil cover so you can see the coils.
Are they getting cold?
Is there a frost pattern that is fairly even over the entire coil?
If there is an evaporator fan, is it running?
Is the compressor running?

I would not buy a new unit until I was confident that I knew what was wrong with the old one.

Here is a good site with repair info
http://www.applianceaid.com/repair-help.html

Note that much of the info on refidgerators will also apply to you if your unit has auto defrost.
THIS FORUM IS DEAD!!!!!!!
MVMOORE70  
#3 Posted : Friday, September 25, 2009 11:51:49 AM(UTC)
MVMOORE70

Rank: Member

Groups: Registered
Joined: 9/23/2009(UTC)
Posts: 4

It is auto defrost. I don't know how to get to the things you mentioned.
denman  
#4 Posted : Friday, September 25, 2009 12:04:57 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Perhaps with a Model Number someone who frequents this forum may be able to help.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.