Amana oven error code F0 - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Amana oven error code F0 Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: ARTC7600E	Brand: Amana	Age: More than 10 years
Previous Topic Next Topic

tlove61		#1 Posted : Tuesday, September 22, 2009 8:14:18 AM(UTC)
Rank: Member Groups: Registered Joined: 9/22/2009(UTC) Posts: 2		i replaced the ERC and now an error code of F0 is being displayed after using the BAKE options. What's confusing is the error code doesn't always display, but when it does have to press oven/cancel to get any type of response from the display panel. There's not set pattern on what may be triggering this error code?? What's your recommendations?? Thanks


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Wednesday, September 23, 2009 8:30:40 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		According to the Service manual, an "F0" error code means: "Loss of safety signal". Verify the glass ribbon cable connection to the adapter board. Check the tracks in the ribbon cable for hairline cracks. A magnifying glass might help here. If there is nothing wrong then the adapter board might be a problem. - The adapter board Part number: AP4282057 Here are the breakdown diagrams and Replacement parts for AMANA ARTC7600E \| AppliancePartsPros.com Gene.


User Profile View All Posts by User View Thanks

tlove61		#3 Posted : Wednesday, September 23, 2009 2:19:39 PM(UTC)
Rank: Member Groups: Registered Joined: 9/22/2009(UTC) Posts: 2		If it turns out to be one of the following parts as you stated below can there be any potential damage to the new ERC that was just installed??? Thanks According to the Service manual, an "F0" error code means: "Loss of safety signal". Verify the glass ribbon cable connection to the adapter board. Check the tracks in the ribbon cable for hairline cracks. A magnifying glass might help here. If there is nothing wrong then the adapter board might be a problem.


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Thursday, September 24, 2009 12:36:47 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Quote: ...If it turns out to be one of the following parts as you stated below can there be any potential damage to the new ERC that was just installed???... No, I do not think so. The worst thing (which I forgot to post) is that in case if there is something wrong with the ribbon cable - the new glass is no longer available. Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close