upper spray arm hits the assembly holding it Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
	Brand: Kenmore	Age: 1 - 5 years
Previous Topic Next Topic

ajbn		#1 Posted : Wednesday, September 9, 2009 9:38:26 AM(UTC)
Rank: Member Groups: Registered Joined: 9/8/2009(UTC) Posts: 5		We noticed that the top rack of dishes was not getting clean. I twirled the upper spray arm and it is stopped because it hits the assembly at the back that it is connected to. Is it bent or loose? We can't tell. Has anyone had this problem? Thanks
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Wednesday, September 9, 2009 2:23:42 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		What is the complete model number of the dishwasher? Gene.
User Profile View All Posts by User View Thanks

ajbn		#3 Posted : Wednesday, September 9, 2009 2:48:08 PM(UTC)
Rank: Member Groups: Registered Joined: 9/8/2009(UTC) Posts: 5		the model number is 665.1604
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Wednesday, September 9, 2009 2:54:07 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The model number you posted is incomplete. 4 more digits are missing. Gene.
User Profile View All Posts by User View Thanks

ajbn		#5 Posted : Wednesday, September 9, 2009 3:00:06 PM(UTC)
Rank: Member Groups: Registered Joined: 9/8/2009(UTC) Posts: 5		ok, I found it! 66516049402
User Profile View All Posts by User View Thanks

Gene		#6 Posted : Wednesday, September 9, 2009 3:04:22 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Check by the diagram if there is no missing parts and post the result. Gene.
User Profile View All Posts by User View Thanks

ajbn		#7 Posted : Wednesday, September 9, 2009 3:33:39 PM(UTC)
Rank: Member Groups: Registered Joined: 9/8/2009(UTC) Posts: 5		It looks like it's all there. Part 8 is up inside of part 10. Is that how it should be? It seems like that is where the problem is because when I hold part 10 up and spin it, it doesn't hit.
User Profile View All Posts by User View Thanks

Gene		#8 Posted : Sunday, September 13, 2009 5:49:05 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Sorry for the delay. Make sure the part 7 is in place and properly holding part 6. Gene.
User Profile View All Posts by User View Thanks

ajbn		#9 Posted : Monday, September 14, 2009 8:21:15 AM(UTC)
Rank: Member Groups: Registered Joined: 9/8/2009(UTC) Posts: 5		Yes, you were right. It was out of place. I can't believe we didn't notice. How is it that you could figure it out from there and we couldn't see it right in front of us? Thanks a million. You saved us a repair visit (and accompanying huge bill). Thanks again. Jane
User Profile View All Posts by User View Thanks

Gene		#10 Posted : Monday, September 14, 2009 12:50:15 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome, Jane. There is no magics. This is very common situation and I've seen it many times. I'm glad you were able to fix it with no cost to you. Thank you for the feed back and good luck with your dishwasher. Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)