Rank: Member
Groups: Registered
Joined: 9/4/2009(UTC)
Posts: 4
|
Hello. In need of some help/info. for my Kenmore oven. 2 days ago I used the self cleaning option on the oven. After the cleaning was done and the unit cooled off, the oven door will not open. It arrears the door latch switch or motor may have malfunctioned. The 4 digit failure code is F5, and the 3 digit code is E1. According to the tech sheet, the door latch is not operating. If the door switch needs to be replaced, how do I get the door open and the glass top off to do so. Any help would be appreciated. Thanks.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
In order to provide most accurate advice we need the complete model number of the oven. If this a freestanding range then check behind the bottom drawer.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/4/2009(UTC)
Posts: 4
|
Here is the complete model #, 95792000. Hope this will help. Thanks.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
You have to pull the range out of the wall and remove the rear panel in order to access the door latch mechanism and unlatch the door. Check the door latch switch and motor as described in the Tech sheet. - The door latch assembly Part number: AP3968900
If there is nothing wrong with the door latch then the control board can be bad. - The control board Part number: AP3174668
Gene.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
