Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Reisingkids  
#1 Posted : Thursday, July 30, 2009 7:39:15 PM(UTC)
Reisingkids

Rank: Member

Groups: Registered
Joined: 7/30/2009(UTC)
Posts: 2

I have a Maytag washer that will not spin. I can spin it by hand but it is hard to do. It is much tighter than the motor would be able to turn. The motor does turn and the belt looks fine. It felt like maybe something got between the tubs and was presenting resistance, but I verified nothing between tubs. I haven't torn it apart but there is no visible signs or sounds that indicate a bearing.
Any thoughts on where I should focus my attention?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Friday, July 31, 2009 4:25:44 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Pull the front panel and tilt the washer back. Remove the belts and turn the tranny pulley in the spin direction. The tranny should start to spin. If not, look for signs of water coming from the tub seal. If ok, you probably have something stuck in the tub. If a leak, you probably have stuck brake shoes.
Post results.
Reisingkids  
#3 Posted : Friday, July 31, 2009 8:08:18 PM(UTC)
Reisingkids

Rank: Member

Groups: Registered
Joined: 7/30/2009(UTC)
Posts: 2

I followed those instructions and seemed fine. I ran in spin cycle and it worked. Ran a load through fine. Puzzling why it is working. I am sure I have not seen the last of this one. Thanks for your thoughts.
richappy  
#4 Posted : Saturday, August 1, 2009 12:32:33 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
You probably jerked free the brake shoes. If it happens again, turn the tranny pulley and tap on the brake housing to release the brakes.
Users browsing this topic
Guest (2)
Similar Topics
Maytag wont spin fast enough (Washer Repair)
by knowles779 5/22/2014 6:37:32 AM(UTC)
Maytag wont spin-agitates fine-loud noise on spin (Washer Repair)
by trogdor636 9/21/2013 12:35:25 PM(UTC)
maytag wont spin (Washer Repair)
by jorgey64 9/5/2013 7:54:54 PM(UTC)
Maytag wont spin (Washer Repair)
by wheels36 5/22/2009 6:45:23 AM(UTC)
maytag wont spin (Washer Repair)
by bigbuck 11/5/2008 3:15:24 PM(UTC)
maytag wont spin after installing a Mounting stem repair kit (Washer Repair)
by grouse 10/6/2008 9:46:27 AM(UTC)
Maytag wont spin (Washer Repair)
by Coroner 3/7/2008 6:53:58 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.