Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
dryer not drying enough
Options
Go to last post Go to first unread
Model: LG6151XSWO Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
lt3  
#1 Posted : Thursday, January 3, 2008 9:19:00 AM(UTC)
lt3

Rank: Member

Groups: Registered
Joined: 1/2/2008(UTC)
Posts: 9
i have a whirpool that i replaced the high limit thermostat and it still isn't drying like it use too ? next to replacing the dryer where / what should i try next?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Thursday, January 3, 2008 7:19:14 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
If it takes longer time to dry but there is warm inside the dryer then the problem is a clogged vent outside the dryer.

Disconnect the vent hose from the dryer and run a couple loads. If you see better time, then the vent has to be cleaned.

- Here are the break down diagrams for the Whirlpool dryer Model LG6151XSW0

Good luck.
Gene.
Back to top
lt3  
#3 Posted : Friday, January 4, 2008 3:37:31 AM(UTC)
lt3

Rank: Member

Groups: Registered
Joined: 1/2/2008(UTC)
Posts: 9
gene thanks for the responce . i changed the dryer hose when i changed out the high temp sensor thing , any ideas if it might be another sensor ?
Back to top
okbobcats  
#4 Posted : Friday, January 4, 2008 4:23:39 AM(UTC)
okbobcats

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/2/2007(UTC)
Posts: 129
It could be part #ap3116922 page 1 item 8. This part controls the heat in your dryer. Does your dryer get hot or does it just get warm? you could also have some trouble with your burner.
Back to top
Gene  
#5 Posted : Friday, January 4, 2008 7:34:50 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
There is a vent inside the wall and not only the vent hose.

This vent causing the air flow restriction more often.

That's why I recommended to disconnect the hose and run a couple of loads without the hose.

Gene.
Back to top
lt3  
#6 Posted : Friday, January 4, 2008 9:38:45 AM(UTC)
lt3

Rank: Member

Groups: Registered
Joined: 1/2/2008(UTC)
Posts: 9
thank you very much ! i promise not to tell my wifee where i figured out how to fix the dryer she really wanted a new one
Back to top
Users browsing this topic
Guest (5)
Similar Topics
Dryer not drying enough (Dryer Repair)
by freddyfrenchy 2/2/2011 5:09:29 PM(UTC)
Dryer Not Drying Enough - Kkenmore Elite (Dryer Repair)
by ray peralez 4/16/2010 11:12:17 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET