Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
ken10  
#1 Posted : Wednesday, July 8, 2009 9:54:41 PM(UTC)
ken10

Rank: Member

Groups: Registered
Joined: 7/8/2009(UTC)
Posts: 3

My HOTPOINT refrigerator was not defrosting last week,when i put the refrigrerator into defrosting cycle manualy by using jumper wire the heater start working and defrosting ice, i changed the mother board after but the refrigerater still not defrosting.
any idea what's going on?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Thursday, July 9, 2009 12:16:52 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Quote:
...i put the refrigrerator into defrosting cycle manualy by using jumper wire the heater start working and defrosting ice...


Where exactly did you put that jumper wire?

Gene.
ken10  
#3 Posted : Thursday, July 9, 2009 12:45:42 PM(UTC)
ken10

Rank: Member

Groups: Registered
Joined: 7/8/2009(UTC)
Posts: 3

Originally Posted by: Gene Go to Quoted Post
Where exactly did you put that jumper wire?

Gene.

i put the jumper wire in between the two wires j11(line) and j9(defr.).
Gene  
#4 Posted : Thursday, July 9, 2009 7:50:45 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Remove these wires from the control board and measure the resistance between them. Post the result.

Gene.
ken10  
#5 Posted : Friday, July 10, 2009 12:07:06 AM(UTC)
ken10

Rank: Member

Groups: Registered
Joined: 7/8/2009(UTC)
Posts: 3

Originally Posted by: Gene Go to Quoted Post
Remove these wires from the control board and measure the resistance between them. Post the result.

Gene.

i have aresistance reading 0.75 ohm between the two wires (defr.) and (line).
Gene  
#6 Posted : Friday, July 10, 2009 2:05:15 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
This reading shows there is a short somewhere in the defrost circuit. Normal resistance should be about 22 Ohms. Do not use the refrigerator until it's fixed or it'll damage the new control board.

You have to remove the rear panel in the freezer and check the defrost heater and the defrost thermostat for continuity.

Here are the breakdown diagrams and Replacement parts for GE HSS25GFTAWW | AppliancePartsPros.com

Gene.
Users browsing this topic
Guest (5)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.