Rank: Member
Groups: Registered
Joined: 12/14/2012(UTC) Posts: 1
|
Recently, my machine quit spinning. I replaced the thrust washer kit, which took care of the spin problem, but now, the clothes smell strong of soap. Clothes seem to have spun out ok, but seems the agitator may not be aggitating as aggressively, and when spin cycle stops, the drem stops quite rapidly, rather than more of a wind down.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
There is nothing you did in replacing the thrust washer that should have affected the agitator.
I would check the drain hoses and the pump. It may be that there is a partial clog and the water is not getting completely out of the clothes during spin.
You can also observe the agitation to see if the agitator is working properly.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close