Rank: Member
Groups: Registered
Joined: 3/21/2011(UTC) Posts: 2
|
The dryer had power to the front panel. All switches/buttons functioned with the exception of the "Start Button" and "Off" buttons. These two would not function. I decided two cycle the breaker and see if the unit needed to be reset. After cycling the power, zero of the buttons on the front screen work. Obviously, this starts with the "Control On" button which would not power up the unit. I checked voltage at the plug and had 240V, I checked voltage on the terminal strip at the dryer and proper resistance values of the cord--all checked good. I removed all connectors to the control board and re-seated these connections. Can't find a manual on line to help me further. Any help would be appreciated. Also, no thunderstorms since last use. Thanks in advance.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
|
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Rank: Member
Groups: Registered
Joined: 3/21/2011(UTC) Posts: 2
|
Thanks for the link to the manual. I was able to troubleshoot the problem to the wiring harness with the information in the manual. Many, many thanks. Just saved a bunch of money!!!
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close