Dishwasher Repair

JMagnuson · #1 (**permalink**) 10-23-2007, 03:34 PM

After a power outage, the control panel is blank, and there is a high-pitched sound from the interior of the dishwasher. This is in Seattle. The power outage was from wind, no lightning. The breaker is good; the dishwasher has power.

Joel

richappy · #2 (**permalink**) 10-24-2007, 03:04 AM

Verify voltage to the control module and no blown thermal fuse. If ok, probably a blown control module pn AP3203951

JMagnuson · #3 (**permalink**) 10-24-2007, 07:40 AM

I put the breaker back on. I unscrewed the front panel. There is an actuator which connects to the latch. I depressed it. There was a beep, and the control panel "NORMAL" wash light came on. I re-assembled the door. The dishwasher is now operating. The power outage had caused the control module to shut down.

Joel

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

GE Dishwasher

Dishwasher Repair

After a power outage, the control panel is blank, and there is a high-pitched sound from the interior of