Replaced Timer, but still must manually re-set timer to run after each cycle. Last light stays on for “cycle complete” until you manually turn timer. How do I get it to advance automatically or get the light to turn off.
Will not start new cycle while light is on. Must open control panel to turn timer manually or I would leave it.
[COLOR=Blue]“Won’t auto re-start after final dry cycle”[/COLOR]
From what I can see this is how it is supposed to work
Here is your operators manual
http://shared.whirlpoolcorp.com/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%209741182.pdf