whirpool fridge not retarting after defrost time

Refrigerator & Freezer Repair
1

hello all
I have a whirlpool ed22pqxfw01
does not restart cooling after defrost time if i turn the df a few clicks cc it starts until the next df time out but does not restart
I installed new df timer 482493 and place black wire on term 1 since i was told it was a cumulative compressor run application.

the fridge ran all night and temp to operating range however it did not restart
I had to turn new df cc untill it clicked on

All fans run, it cools but after DF time it never restarts cooling and temps increase to 56 in fridge area

what is the issue seems something is not allowing the timer to turn to next cycle
please help me fix this I am not in a position to afford a new one and service in my area is a big challenge

thanks in advance

2

Here is the wiring diagram
http://www.servicematters.com/docs/wiring/Wiring%20Sheet%20-%202186936.pdf

And here is the part install sheet
http://www.servicematters.com/docs/part_instruct/482494.pdf

I would recheck how you wired it in as it does look likew the black wire (Jumper) should go on pin 1.

3

Thanks
However the links do not work on this end

Coconut

4

Yes I am having the same problem here.

Hopefully it is just a temporary problem with the site.

5

I had read in a earlier post that the fridge i have whirlpool model i have is a
cumulative compressor which whould use the Version 2 wiring fig 3
on instructions the black wire show terminal 1 placement
the links however never came active in the above post
anyone have any further info if the part number of the fridge is a cumulative compressor run time application ?

coconut:confused: