MH3184XP SI Whirlpool microvave

Replaced a GREAT working GE microwave-- with a whirlpool MH3184xp SI
had problems from the first week on. We changed to stainless
steel — should have kept the GE. Door switches went out of
adjustment, Repairman said case was to thin so he pulled
out on the latch and it began working!! Now we have power to every thing switches work,lights work, but when pushing the start button there’s a COLOR=magenta and the fans run–soundslike its working but [COLOR=red]NO HEAT!!![/COLOR] So [COLOR=magenta]Whirlpool[/COLOR] is a greatlooking microwave, but don’t count on it. Repair man not sure so wants to replacemagnetron, diode, and TCO, we paid [COLOR=red]$60.00[/COLOR]for this shotgun diagnostic expertise.The cost to (REPAIR) [COLOR=red]$396.00[/COLOR] The micro is 2 years and 2 months OLD ,MFG DATED
Sept . 05 We changed all of our appliences to stainless Whirlpool. Is there any help, we have not repaired so-----PLEASE HELP!!
:mad: At that price we could buy a new microwave.

We have a 2005 Whirlpool Gold microwave that has worked ok until Christmas eve . . . it failed to turn off at the end of a timed cooking cycle. We unplugged it and tried it again, but it continues to run. The repairman is scheduled for tomorrow . . . from your experience it doesn’t look good. Consumer reports rates one of the Whirlpool’s as “good”, but their products have been disappointing. :frowning:

[quote=RMuller;8961]Replaced a GREAT working GE microwave-- with a whirlpool MH3184xp SI
had problems from the first week on. We changed to stainless
steel — should have kept the GE. Door switches went out of
adjustment, Repairman said case was to thin so he pulled
out on the latch and it began working!! Now we have power to every thing switches work,lights work, but when pushing the start button there’s a COLOR=magenta and the fans run–soundslike its working but [COLOR=red]NO HEAT!!![/COLOR] So [COLOR=magenta]Whirlpool[/COLOR] is a greatlooking microwave, but don’t count on it. Repair man not sure so wants to replacemagnetron, diode, and TCO, we paid [COLOR=red]$60.00[/COLOR]for this shotgun diagnostic expertise.The cost to (REPAIR) [COLOR=red]$396.00[/COLOR] The micro is 2 years and 2 months OLD ,MFG DATED
Sept . 05 We changed all of our appliences to stainless Whirlpool. Is there any help, we have not repaired so-----PLEASE HELP!!
:mad: At that price we could buy a new microwave.[/quote]
Mr. Muller,
Thank You for your reply.

We are sorry that you are not satisfied with our response.

Unfortunately we are unable to look into exchange unless an unit was deemed unrepairable by an Authorized Service Technician. Our warranty is for repair only.

We apologize for the inconvenience that this has caused you.

Thank You,

Nicole F.
Whirlpool Customer [COLOR=red]Loyalty Team[/COLOR]
[COLOR=red][/COLOR]
[COLOR=red][/COLOR]

[THREAD ID:1-5ZEEUJ]

-----Original Message-----

From: [COLOR=#0000ff]eimuller@cox.net[/COLOR]

Sent: 12/21/2007 12:52:41 PM
To: [COLOR=#0000ff]whirlpool_customerexperience@whirlpool.com[/COLOR]
Subject: Whirlpool.com Email Us Form Submission

NICOLE,

HOW WOULD YOU FEEL IF YOU HAD REPLACED YOUR GOOD WORKING GE. APPLIANCES
WITH STAINLESS WHIRLPOOL, ONLY TO HAVE THE PROBLEMS WE HAVE HAD IN TWO
YEARS?
YES, LOWE’S OFFERED 10% OFF IF WE WOULD SPEND $400.00 FOR A NEW SAME
MODEL MICROWAVE. WITH ONLY TWO PEOPLE USING THE MICROWAVE FOR TWO YEARS,
THIS IS OBVIOUSLY A MANUFACTURER’S DEFECT. THIS WAS ONLY ONE REQUEST IN—
I’M SURE THOUSANDS OF OTHER WHIRLPOOL APPLIANCE OWNERS’ EMAILS EACH WEEK
HAVING PROBLEMS!

THE PR AND RETENTION OF A LONG TIME WHILRPOOL OWNER SHOULD OUT WEIGH THE
SMALL COST OF REPAIR. WE WOULD LIKE YOU TO RECONSIDER OUR REQUEST WITH A
MORE REASONABLE SOLUTION.

THANK YOU, RON MULLER

----- Original Message -----
From: <[COLOR=#0000ff]whirlpool_customerexperience@whirlpool.com[/COLOR]>
To: <[COLOR=#0000ff]eimuller@cox.net[/COLOR]>
Sent: Friday, December 21, 2007 9:37 AM
Subject: RE: Whirlpool.com Email Us Form Submission

Dear Mr. Muller:

Thank you for visiting the Whirlpool website, we appreciate hearing from
you.

We do apologize for the trouble that you are having with your Microwave.

I did look into your file and see that a representative did offer you an
repurchase incentive. At this time there is no further assistance available
due to the age of your Microwave.

We do apologize for any inconvenience that this may have caused you.

Thank you for allowing us to assist you today.

You are a valued customer and we apologize for any inconvenience this
concern may have caused.

We invite you to contact Whirlpool again either by calling (866) 698-2538
between 8:00am to 8:00pm EST weekdays or by emailing whenever the need
arises. When calling please press the available option or stay on the line
to reach a representative.

Sincerely,

Nicole F.
Whirlpool Customer Loyalty Team
Whirlpool Customer eXperience Center
[COLOR=#0000ff]http://www.Whirlpool.com[/COLOR]

*If replying, please use Forward verses Reply or New as that will leave
this message intact and will help us to respond faster.

[THREAD ID:1-5ZEEUJ]

-----Original Message-----

From: [COLOR=#0000ff]eimuller@cox.net[/COLOR]
Sent: 12/18/2007 12:59:30 PM
To: [COLOR=#0000ff]whirlpool_customerexperience@whirlpool.com[/COLOR]
Subject: Whirlpool.com Email Us Form Submission

class: CIC
form: Whirlpool Experience
subject: MH3184XP SI
first_name: Ronald
last_name: Muller
add1: .
add2:
city: > state: AZ
zip: 85249
web_form_email: [COLOR=#0000ff]eimuller@cox.net[/COLOR]
contact_by_ph: 480 726 3125
fax_ph:
model: MH3184XP SI
serial: TRS2013583
contact_method: Email
product: Microwave,MHC
body: Replaced a GREAT working GE microwave with a MH3184xp SI
had problem from the first week on. We changed to stainless
steel — should have kept the GE. Door switches out of
adjustment, Repairman said case was to thin so he pulled
out on the latch and it began working!! Now we have power to every thing
switches work,lights work, but when pushing the start button there’s a
(click) and the fans run–sounds
like its working but NO HEAT!!! So Whirlpool is a great
looking microwave, but don’t count on it. Repair man not sure so wants to
replace
magnetron, diode, and TCO, we paid $60.00 for this shotgun diagnostic
expertise.
The cost to (REPAIR) $396.00 The micro is 2 years and 2 months OLD ,MFG
DATED
Sept . 05 We changed all of our appliences to stainless Whirlpool.
Is there any help
available with our Microwave?
Ron
Muller [COLOR=#0000ff]eimuller@cox.net[/COLOR]

regarding: Owner Support
optin_method: No

THANKYOU,

RON----------This is what I recieved from Whirlpool, going shopping for
a NEW microwave tomorrow—Last WHIRLPOOL for us–anything else is
BETTER!!!