Maytag Neptune Super Stack will not spin while in spin cycle.

Washer Repair
1

Having problems with a Maytag Nuptune Super Stack/ MLG 2000AWW. It goes through the cycle but will not spin out. Tumbles back and forth as to balance the load. I looked at the Manual linked for Stokes who seems to be having the same problem, but I found it isn’t the exact machine. Mine is a STACK, therefore, parts may be different??? I order the master control board part, 22004325R [ATTACH]1102[/ATTACH], however, I don’t know where to place it. And not sure if the manual shows the area for my machine.:frowning: The attachment is a picture of the part I bought. Please tell me if I bought the right part.

Help in this department is greatly appreciated.
Maytag 22004325 Washer Dryer Control Board.bmp (120.5 KB)

2

It looks to me like you have the board for the dryer part of your machine, see this exploded view.

Replacement parts for MAYTAG MLG2000AWW | AppliancePartsPros.com

Here is the service manual for your exact machine.

http://www.servicematters.com/maytag_library/docs/16009127.pdf

Go through the trouble shooting section on the washer and see if you can narrow your problem.

Let us know if you need further guidance and help, and good luck.

Please post your results, thanks

3

With the same porblem stated. I have replaced the computer control board still having same problem, next step?