Lid Lock light flashes when calibrating

Washer Repair
1

Brand: Maytag Centennial Top Load Washer
Model Number: MVWC425BW0
Main Symptom: Will not Calibrate after Gearbox Replacement
What happens & when: We replaced the gearbox and then calibrated machine. When at the end of calibration, the lid lock light just continuously blinks. I then placed it in diagnostics mode to get the codes, The wash, rinse, spin and lid lock lights come on and it starts filling up with water and you can’t cancel. Then the lid unlocks while its still filling with water. It eventually stops filling with water but the wash, rinse and spins lights remain on and nothing happens. What might be wrong?

Error Code (if any):
Parts or tests already tried:
Photos / video link:

2

It is telling you there is an error fault code. Try and put it into a diagnostic mode and find the error code. Re-check all your connections. See if the wash, rinse, and spin lights represent an error code.

3

Thank you for your reply. The error code is F7E1.

4

That is a motor/speed fault. It indicated a problem with the motor. re-check your connections.