>>>HERE IS A GOOD ONE for the pros<<<

Washer Repair
1

OK have a Electrolux IQ front load washer. Got error code E38.
Replaced Pressure switch
Cleared stored codes.
E00- No Errors
Start a wash cycle and just get two beeps and nothing happens.

Go into diagnostic mode. Test all 11 steps/cycles. They all pass. At the end of the diagnostic check error codes. Still E00 (no errors)

Start a normal wash cycle and get just 2 beeps and nothing happens.

What do you guys think? Very hard to diagnose when there is no error codes. I’m stumped.

Thanks in advance for any and all help!

2

During Installation Cycle It seems to stay stuck at 2mins and not advance.

Finally went to 1 min and filled and spinned (this was after about 6mins actual time)

3

Model is eiflw55hiw0