I have a front loading Frigidaire washer and dryer and they are just out of warranty by 21 days (of course!). When I did a load of laundry two days ago, they hadn’t spun out. I changed to several different settings and re-ran the load, but still it won’t spin. (It agitates okay during the wash and rinse cycle, but won’t spin out between.) Upon recommendation from a local repairman, I took off the black rubber “change catcher” on the front of the pump and retrieved almost $3 in change, an earring and a tiny screw (from one of my husband’s computer repair jobs). I assembled the washer back together and re-did the load and it still isn’t spinning out. The repairman told me to take it back apart to ensure that there isn’t anything caught in the pump. I’m going to do that when I get home from work tonight. Does anyone know of anything else I can try. The washer is just one year old. (Ironicly, the heating element went out of the dryer 10 days ago, still out of warranty, though.) Just my luck!!!
I rechecked the black boot and the pump last night and there isn’t anything in them. Is the module control the only thing that could be wrong with it at this point or are there multiple parts that could be chosen to replace? I just hate to sink a lot of money into a board and it not be the problem.