Amana top-load washer has me stuck

Brand: Amana
Model Number: NTW4500CQ0
Main Symptom: Won’t stop filling
What happens & when: water will not stop filling when starting

Error Code (if any):
Parts or tests already tried: Unplugged it while filling and water stops; checked both pressure switches with multimeter and getting around 17 to 18 ohms when blowing into rubber hose(s); checked hoses for leaks and none found; air pressure will hold after blowing into the hose and crimping it; blew into hose and can hear air coming out in the cup on the side of the tub; I can also hear the diaphram clicking in the switches and see them moving when blowing into the rubber line. What am I missing???
Photos / video link:

Does the water stop when you push the timer knob in to stop the cycle?

Based on the symptoms you’ve described and the tests you’ve already performed, I suspect the timer( WP8572976 Washer Timer Control | Genuine Whirlpool OEM In Stock ) has a stuck contact. This can happen due to age, dust buildup, normal wear and tear, or internal component failure.

To test the timer, turn off the water supply. With the appliance plugged in and the timer knob pushed in (off position), check for 120 VAC at the water inlet valve terminals. If you measure 120 VAC at the valves with the knob pushed in, the timer is not opening the circuit properly and will need to be replaced.