Kitchen Aid kudp01dlwh3 will not start - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kitchen Aid kudp01dlwh3 will not start Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KUDP01DLWH3	Brand: Kitchen Aid	Age: 5 - 10 years
Previous Topic Next Topic

swimmer0221		#1 Posted : Tuesday, May 18, 2010 6:54:07 AM(UTC)
Rank: Member Groups: Registered Joined: 5/18/2010(UTC) Posts: 2		Hi All, I have a Kitchen Aid dishwasher (Kudp01dlwh3) that has power to the machine and control panel but no lights come on nor will it run. I tried replacing the thermal fuse but that didn't work. Any ideas on what may be wrong?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Wednesday, May 19, 2010 2:01:46 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for WHIRLPOOL KUDP01DLWH3 Undercounter Dishwasher \| AppliancePartsPros.com Here is the tech sheet Replacement parts for WHIRLPOOL KUDP01DLWH3 Undercounter Dishwasher \| AppliancePartsPros.com I am assuming that you have checked for 120 volts from P7 on the board to P8 and P2-6 and in both cases power is OK. Sounds like the control board is toast. At least it is the most likely cause.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

swimmer0221		#3 Posted : Thursday, May 27, 2010 9:53:15 AM(UTC)
Rank: Member Groups: Registered Joined: 5/18/2010(UTC) Posts: 2		Denman - Thank you for the response. Which do I need? Would it be the control panel? Part Details - WHIRLPOOL Panel-cntl, part number: AP3177379 or the Electronic Control Assembly? Part Details - WHIRLPOOL Electronic control assembly, part number: AP3775964 Thank you again.


User Profile View All Posts by User View Thanks

denman		#4 Posted : Thursday, May 27, 2010 10:03:27 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Most likely would be the electronic control board.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close