Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
handiman  
#1 Posted : Saturday, September 1, 2007 7:23:30 AM(UTC)
handiman

Rank: Member

Groups: Registered
Joined: 9/1/2007(UTC)
Posts: 3

Our Whirlpool 8 inch burner will stay at full heat when the control knob is placed in low heat position. It will stop only when the control is placed in the off position. Does the control have a thermostat in it that controls the temp of the burner? I have ordered a new control for the 8 inch burner.

This could be a real problem if a cook did not notice that the burner is still going at full blast even tho the control is on low heat.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Admin / APP Team  
#2 Posted : Saturday, September 1, 2007 9:31:34 AM(UTC)
Admin / APP Team

Rank: Administration

Groups:
Joined: 7/18/2007(UTC)
Posts: 799

Was thanked: 1 time(s) in 1 post(s)
Sounds like the switch is bad. There is no thermostat though, it's an infinite switch and is controlled with a bi-metal. Here is an excellent explanation of how this type of a switch works.

Before replacing the switch, don't forget to turn the power off to the range by either unplugging it in the back or turning off the right circuit breakers.

Let us know how the replacement goes.
handiman  
#3 Posted : Monday, September 3, 2007 4:06:16 PM(UTC)
handiman

Rank: Member

Groups: Registered
Joined: 9/1/2007(UTC)
Posts: 3

Thanks for the information. I read the switch explanation link you provided. looks like the contacts are sticking closed at times. I will be sure to disconnect the power before changing the switch. It is on order and should be shipped tomorrow. Thanks for your reply.
Handiman
handiman  
#4 Posted : Saturday, September 8, 2007 5:39:33 PM(UTC)
handiman

Rank: Member

Groups: Registered
Joined: 9/1/2007(UTC)
Posts: 3

I recieved the part and installed it. It works fine now. Thanks for your help.

Handiman
Admin / APP Team  
#5 Posted : Monday, September 10, 2007 8:22:11 AM(UTC)
Admin / APP Team

Rank: Administration

Groups:
Joined: 7/18/2007(UTC)
Posts: 799

Was thanked: 1 time(s) in 1 post(s)
Good job, Handiman.

Thanks for letting us know.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.