junior98nb - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

junior98nb Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: JMC8100ADB	Brand: Jenn-Air	Age: 1 - 5 years
Previous Topic Next Topic

junior98nb		#1 Posted : Tuesday, May 4, 2010 3:55:59 PM(UTC)
Rank: Member Groups: Registered Joined: 5/3/2010(UTC) Posts: 6		Hello my microwave is blowing fuses I have replaced the capasitor and the diode and still blowing fuse I disconnected the diode and it runs but no heat I tested the mag between the two connectors and got a low reading but no reading between terminals and case no reading I know that is normal but when I disconnect the mag and try a cycle it pop's fuse . Could it be the transformer? I don't want to buy a mag if it is tranformer . can you tell me how to test


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

junior98nb		#2 Posted : Friday, May 7, 2010 4:59:35 AM(UTC)
Rank: Member Groups: Registered Joined: 5/3/2010(UTC) Posts: 6		need help at testing transformer output


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close