KitchenAid Dishwasher No Water goes to Arms - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

KitchenAid Dishwasher No Water goes to Arms Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KUDR01TJBLO	Brand: Kitchen Aid	Age: 1 - 5 years
Previous Topic Next Topic

kitchenaidhelpme		#1 Posted : Wednesday, June 11, 2008 8:11:23 AM(UTC)
Rank: Member Groups: Registered Joined: 6/11/2008(UTC) Posts: 1		I can not figure out what is wrong with it, water goes in and gets heated, but water will not go to neither of the three spinning arms and they do not spin (cicle starts, goes trough and drains??). Removed the bottom arm, there is no blockage, that I can see. Floater is clean too and drains fine, but just wont work, what could the reason be Any advise or good schematic ....:(


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

richappy		#2 Posted : Friday, June 13, 2008 2:07:20 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Remove pump cover, then remove the half round impeller cover and the chopper assembly. If the screen is clogged, replace the chopper and check valve next to the chopper. If OK, sponge out the water, turn water off to dishwasher, and observe the rotation of the motor. If it turns the wrong way, replace the motor.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close