washer fills, timer doesn't advance, nor does it agitate, spin, or drain - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

washer fills, timer doesn't advance, nor does it agitate, spin, or drain Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: VVXR1040T2WB	Brand: Hotpoint	Age: More than 10 years
Previous Topic Next Topic

threads68		#1 Posted : Monday, June 9, 2008 10:17:17 AM(UTC)
Rank: Member Groups: Registered Joined: 6/6/2008(UTC) Posts: 4		:confused:My washer will fill with water but after that it is silent, the timer doesn't advance, it doesn't agitate, spin, or drain the water, what could be wrong with it? the machine is about 12 years old, I used to be able to "wiggle" the wires and make sure that everything was connected and that would fix the problem, this time I wasn't so lucky. Help!!!!!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

threads68		#2 Posted : Monday, June 9, 2008 3:16:08 PM(UTC)
Rank: Member Groups: Registered Joined: 6/6/2008(UTC) Posts: 4		I have checked the lid switch continuity and the timer continuity, both are testing okay, what else could it be?????


User Profile View All Posts by User View Thanks

threads68		#3 Posted : Monday, June 9, 2008 4:15:50 PM(UTC)
Rank: Member Groups: Registered Joined: 6/6/2008(UTC) Posts: 4		found the problem, after checking the continuity to the motor,which checked out fine, we pulled the circuit/control board, and it had a bad solder point on one of the pins, we resoldered the pin and the washer now works. thought someone might be interested in the outcome of this


User Profile View All Posts by User View Thanks

Narapni		#4 Posted : Sunday, January 17, 2010 12:47:15 AM(UTC)
Rank: Member Groups: Registered Joined: 11/2/2007(UTC) Posts: 48		Thank you for the tip. I too experienced similar situations with 2 Whirlpool washers that will function on only 2 of 3 wash cycles(regular or casaual). Everything checked out and by accident I touched the wiring harness in the control panel and that solved the problem. Turned out another identical unit has the same problem. Problems solved. The model is Whirlpool Wasehr model LSR5132 fr the forumers' information.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close