Rank: Member
Groups: Registered
Joined: 1/18/2010(UTC)
Posts: 4
|
Hello,
The tub is not spinning for the spin cycle. The center post and agitator are spinning at high speed during the spin cycle, but the tub is not. The water was all pumped out of the tub, but the tub did not spin while the water was being pumped out.
Thanks for any comments,
Dale7905
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
The two likely suspects are the clutch and the drive block.
I would start with the clutch, and if that checks out, check out the drive block.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/18/2010(UTC)
Posts: 4
|
Thanks for the suggestions. I checked the tub and it rotated freely so I removed the agitotor top and discovered the tub drive block tabs had been sheared off. I replaced the drive and it looks like that solved the problem. Many thanks.
Dale Houser
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
Great, glad you got it fixed and thanks for the update.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
