Rank: Member
Groups: Registered
Joined: 5/20/2008(UTC) Posts: 2
|
Dryer functions the same in all dry modes.
Will fire ok 1st,2nd and sometimes 3rd time during a cycle. After the glow plug turns on (nice and bright) but no fire. Will repeat one or two times then nothing until door is opened or its let cool down. Cleaned off what i believe is photo cell or eye to see glow. This did not help and want not realy dirty. lens and cell appeared to be in good shape. Kevin
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 5/6/2008(UTC) Posts: 724
Was thanked: 1 time(s) in 1 post(s)
|
Replace the coils on the gas valve Schematic A8740.doc (80kb) downloaded 36 time(s).This is a common problem on these dryers. The coils get hot and quit. Later on they start working again. Replace them. SublimeMasterJW attached the following image(s):
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/20/2008(UTC) Posts: 2
|
Thanks was the direction we were heading but always like another opinion. kps
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close