Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
armdog  
#1 Posted : Tuesday, February 2, 2010 1:57:59 PM(UTC)
armdog

Rank: Member

Groups: Registered
Joined: 2/2/2010(UTC)
Posts: 1

Dishwasher stopped washing but still drains. I took apart and found that where metal piece in chopper and screen completely clogged. Where the chopper and impeller meet each end is broke. How do I know if the motor is still good therefore only replace chopper and impeller.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Wednesday, February 3, 2010 12:10:24 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for WHIRLPOOL GU1200XTLT0 Undercounter Dishwasher | AppliancePartsPros.com
Often if you click on a parts picture a new page will open with more views of that part. Then clicking on a new view should expand it so you can see it better.

Here is the tech sheet
http://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%208533399.pdf

Manually rotate the motor's armature to ensure the bearings etc. are OK.
Check the windings with a meter to see if they are OK
If both OK then motor is probably good
OR
Remove the motor from the unit and hook it up to a line cord and give it a try. You may not even have to remove it from the machine.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.