19 Pages«<910111213>» Go to Page...

bosch dishwasher troubleshoot manual Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: SHU/SHI/SHV	Brand: Bosch	Age: Less than 1 year
Previous Topic Next Topic

Admin / APP Team		#101 Posted : Friday, April 8, 2011 12:27:53 PM(UTC)
Rank: Administration Groups: Joined: 7/18/2007(UTC) Posts: 799 Was thanked: 1 time(s) in 1 post(s)		tsonkovski, there is nothing wrong with that PDF file. Must be your acrobat reader or something on your end.
User Profile View All Posts by User View Thanks

tomjava		#102 Posted : Saturday, May 14, 2011 9:32:40 AM(UTC)
Rank: Member Groups: Registered Joined: 5/14/2011(UTC) Posts: 1		Originally Posted by: chriscw Web search found this: http://www.cteq.ca/Doc_texte/Di...sherTraining%20bosch.pdf Thank you very much,
User Profile View All Posts by User View Thanks

hemagugaraj		#103 Posted : Wednesday, May 25, 2011 3:31:23 PM(UTC)
Rank: Member Groups: Registered Joined: 5/25/2011(UTC) Posts: 1		As suggested in the forums, I removed and examined the control unit. All the solderings look good. Now what should I do? Please provide your suggestions.
User Profile View All Posts by User View Thanks

Gene		#104 Posted : Wednesday, May 25, 2011 4:00:52 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Even if you did not find anything wrong visually, there is still very high chance for the control module to be the culprit in such situation. - The control module Part number: AP2802870 Gene.
User Profile View All Posts by User View Thanks

hayseydi@comcast.net		#105 Posted : Sunday, September 25, 2011 10:33:30 AM(UTC)
Rank: Member Groups: Registered Joined: 9/25/2011(UTC) Posts: 4		Well, I need repair help for a Bosch SHU33A06UC/40 It keeps leaking from the Water Valve. (at least that where it looks like it's leaking from) We replaced it in March, 2010, when putting down a new floor. Now, we have water under that floor and when looking again, it appears as if it;s leaking in the same place. Is this possible?
User Profile View All Posts by User View Thanks

hayseydi@comcast.net		#106 Posted : Saturday, October 15, 2011 2:34:24 PM(UTC)
Rank: Member Groups: Registered Joined: 9/25/2011(UTC) Posts: 4		Thanks, But We've Replaced The Water Pump And All Is Well. This Is, However, The 2nd One We've Replaced In 1 & 1/2 Years And The Unit Is Only 5 Years Old. It Had Better Be The Last. Thanks For The Input.
User Profile View All Posts by User View Thanks

hayseydi@comcast.net		#107 Posted : Saturday, October 15, 2011 2:36:15 PM(UTC)
Rank: Member Groups: Registered Joined: 9/25/2011(UTC) Posts: 4		Well, It's A Little Late In Coming. We Fixed The Dishwasher 2 Weeks Ago By Replacing The Water Pump. But, I Did Use Some Of The Info Found On Your Website, So Thanks For That.:)
User Profile View All Posts by User View Thanks

monthoj		#108 Posted : Wednesday, October 26, 2011 5:30:07 PM(UTC)
Rank: Member Groups: Registered Joined: 10/26/2011(UTC) Posts: 2		Originally Posted by: Gene Even if you did not find anything wrong visually, there is still very high chance for the control module to be the culprit in such situation. - The control module Part number: AP2802870 Gene. Gene, I have a SHX46A with the controls "under the counter" ie on top edge of door. Control Unit is AP3194844. Does this control panel series suffer the same relay solder burn problem of the SHU units that are most prevalent in this discussion? Thanks
User Profile View All Posts by User View Thanks

Gene		#109 Posted : Friday, October 28, 2011 3:23:34 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		It might be. The best solution is probably to remove the module and inspect it. Gene.
User Profile View All Posts by User View Thanks

monthoj		#110 Posted : Friday, November 11, 2011 7:54:09 PM(UTC)
Rank: Member Groups: Registered Joined: 10/26/2011(UTC) Posts: 2		Gene, Removed module, Relay was "unsoldered" like other models. Re-soldered and back in business but also ordered 12 amp relay from DigiKey. So yes, the problem and solution extend to the under counter controller in my SHX46A05UC/14
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (5)

19 Pages«<910111213>» Go to Page...