washer wont run if cold water is selected - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

washer wont run if cold water is selected Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: WHIRLPOOL LXR7144EQ1	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

dennchappy@netscape.net		#1 Posted : Tuesday, April 8, 2008 12:45:34 PM(UTC)
Rank: Member Groups: Registered Joined: 4/8/2008(UTC) Posts: 2		the washer will only fill if hot water is selected it also wont rinse if cold water is selected????


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

gearhead1218		#2 Posted : Tuesday, April 8, 2008 12:51:48 PM(UTC)
Rank: Member Groups: Registered Joined: 4/7/2008(UTC) Posts: 62		Is the cold water on? I know, that's a stupid question but I've seen it before. Check your inlet screens on your hoses and on the inlet valve. If they are fine, and you are getting voltage to the cold water valve coil when it calls for cold water, the the inlet valve is bad.


User Profile View All Posts by User View Thanks

dennchappy@netscape.net		#3 Posted : Wednesday, April 9, 2008 8:45:08 AM(UTC)
Rank: Member Groups: Registered Joined: 4/8/2008(UTC) Posts: 2		thanks,yes the cold water is on and the screens are clear,so the inlet valve is the problem!thanks again!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close