Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
TLC  
#1 Posted : Wednesday, April 2, 2008 11:39:15 AM(UTC)
TLC

Rank: Member

Groups: Registered
Joined: 4/2/2008(UTC)
Posts: 1

The machine will fill and the knob will click through the other phases of the cycles, but nothing takes place (no agitation, rinsing etc). At the end of the perm press cycle only I can force the knob into a "sweet" spot and with great pressure hold the knob while the tub drains and spins. I would like to remove the knob for observation, any idea how to do this or would it be a waste of time? Time for a new washer?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
glen65  
#2 Posted : Wednesday, April 2, 2008 11:58:30 AM(UTC)
glen65

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/31/2008(UTC)
Posts: 322

As long as the washer is in good mechanical condition
I would repair it. Its hard to be 100% certain without
some electrical testing but based on the way you describe it,
the timer itself is likley the root of the problem. You wanted
to know how to get the knob off, heres a pic below.

UserPostedImage
richappy  
#3 Posted : Wednesday, April 2, 2008 1:54:13 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
You have a non-repairable Kingston timer, I usually find a burn terminal causing the problem and if the contact is bad in the timer= new timer time.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.