GE F3 sensor replaced but still get error F3 - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

GE F3 sensor replaced but still get error F3 Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: JTP15BDBB	Brand: GE	Age: More than 10 years
Previous Topic Next Topic

dpmath		#1 Posted : Tuesday, April 1, 2008 1:46:18 PM(UTC)
Rank: Member Groups: Registered Joined: 4/1/2008(UTC) Posts: 1		:( :confused: like others I've read, I have a GE oven with F3 code after about 40 min at 400F. I replaced the sensor and check wires. I'm lost. I have never seen a response that addresses the problem after these steps were taken. Now what?!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

fixtec90		#2 Posted : Wednesday, April 2, 2008 4:45:16 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/26/2008(UTC) Posts: 69		There is an issue with with those connectors. First try cutting out the connectors. Using the correct size wire nuts or but-end connectors hard wire sensor. Also make sure connection at the erc is ok. After that if you're still having trouble it's likely your erc (electronic range control) is giving a faulty reading, and will need to be replaced.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close