Replaced bake element and still not working Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: AER5845QAF	Brand: Amana	Age: 5 - 10 years
Previous Topic Next Topic

needhelpplease		#1 Posted : Saturday, January 9, 2010 7:06:03 AM(UTC)
Rank: Member Groups: Registered Joined: 1/9/2010(UTC) Posts: 3		A hole was burned through the bake element. We replaced the bake element and it still does not work. Does the fire/spark from the bake element going bad typically cause something else to not work?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

magician59		#2 Posted : Saturday, January 9, 2010 8:11:11 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		Does the broil element work?
User Profile View All Posts by User View Thanks

needhelpplease		#3 Posted : Sunday, January 10, 2010 5:30:02 PM(UTC)
Rank: Member Groups: Registered Joined: 1/9/2010(UTC) Posts: 3		Yes, the broil element does work with no problems.
User Profile View All Posts by User View Thanks

magician59		#4 Posted : Tuesday, January 12, 2010 3:59:12 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		You may have a burnt wire or connector at the back of the oven. It should be easy to spot. Be sure to unplug it before exposing yourself to any wiring. It kills without prejudice.
User Profile View All Posts by User View Thanks

needhelpplease		#5 Posted : Tuesday, January 12, 2010 4:10:39 PM(UTC)
Rank: Member Groups: Registered Joined: 1/9/2010(UTC) Posts: 3		Thanks! We replaced the main control panel/clock yesterday and it's working again.
User Profile View All Posts by User View Thanks

magician59		#6 Posted : Tuesday, January 12, 2010 5:41:58 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		Well done!
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)