Rank: Member
Groups: Registered
Joined: 1/9/2010(UTC) Posts: 1
|
We have a Kenmore Elite washer that will fill with water, but that is it. When it is advanced in the cycle to spin it makes a slight humming noise, but nothing else. Otherwise it will not spin, agitate, or drain. Also, it does have a hot smell to it. Would really appreciate some advice or thoughts on what might be wrong. Thanks.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
Take off the cabinet and see if something is stuck in the pump, the basket or the drain hoses.
If they check out, take off the pump and motor and see if the motor is free and will turn when the machine is in the spin mode. You will need to by pass the lid switch to check that out.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close