Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Frigidaire Wont Spin
Options
Go to last post Go to first unread
Model: FWSB5700DS0 Brand: Frigidaire Age: 1 - 5 years
Previous Topic Next Topic
house141  
#1 Posted : Thursday, March 27, 2008 8:22:29 AM(UTC)
house141

Rank: Member

Groups: Registered
Joined: 3/27/2008(UTC)
Posts: 2
it fills, washes fine and everything, but wont spin. I smelled burning smell last night and checked out the clothes. They still has soap suds on them. I tried to move the time into spin cycle and it won't spin. I am supposing that I will check the water pump tonight. Or am I headed in the wrong direction? How can I tell if the pump is bad? Plus I am supposing I will need a new belt too.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Thursday, March 27, 2008 4:34:34 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
If there are suds but no water then the pump is probably good.

Remove the front panel and check the belt.

Replace the belt if it's worn.

Run the spin cycle without the front panel and observe how it works.

Post your findings.

- The part number for the belt is AP3867042

Gene.
Back to top
house141  
#3 Posted : Friday, March 28, 2008 10:23:04 AM(UTC)
house141

Rank: Member

Groups: Registered
Joined: 3/27/2008(UTC)
Posts: 2
opened the front up last night and the belt is still intact. i then put the washer into spin and it spun out with no clothes in it, it still had water from the other night. we then tried another full load and everything went ok this time. any ideas?
Back to top
bambiblaster  
#4 Posted : Friday, March 28, 2008 2:56:37 PM(UTC)
bambiblaster

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/4/2008(UTC)
Posts: 116
Belt may have a bad spot on it and when it starts to spin at that spot it slips// take off belt and feel for thinning spots..
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Frigidaire Wont spin at all, replaced motor too! (Washer Repair)
by Kestryll 11/13/2013 3:43:27 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET