Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Captain Carquest  
#1 Posted : Wednesday, August 15, 2007 4:57:35 AM(UTC)
Captain Carquest

Rank: Member

Groups: Registered
Joined: 8/9/2007(UTC)
Posts: 2

Second request for help on this issue. Last time the gas solenoids were bad, so I made a major assumption this was the problem now.These have been replaced with no change. In the process I broke the ceramic pilot, but in doing so, the unit was still plugged in and I shorted it to ground. This kicked on the blower motor and the gas flame. Now ceramic heater replaced and still no fire.Looking for help on where to go next, or to get a manual that will help me trace the circuit and diagnose the problem. I'm tired of quessing. Please help this dummy.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Admin / APP Team  
#2 Posted : Monday, August 20, 2007 8:55:58 AM(UTC)
Admin / APP Team

Rank: Administration

Groups:
Joined: 7/18/2007(UTC)
Posts: 799

Capt.

Here is the wiring diagram for your dryer. Have you checked the fuse? As you may tell from the diagram, there are a few things to check that pass power to the igniter. Hope this helps.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.